Induction physiological bulb

relative!Pay attention to the following points after receiving the product:

1. LED sound light control lights, radar microwave induction lights, human infrared induction lights are connected to ordinary families commonly used E27

The lamp holder is fine, no manual switch control is required.

2. It cannot be installed on various inductive switches and inductive lamp holders such as sound light control switches, infrared induction switches, and lighting switches.Otherwise, it will cause induction light bulb function (induction, often bright and immortal, flickering when lighting, after lighting, and other phenomena).After the above situation is replaced, the inductive switch and induction lamp can be replaced.

Third, the sound -lighting ball lights are not on during the day, and the sound is on at night. It will be destroyed for 30 seconds.The radar induction bubble/infrared sensing light bulb is not on during the day, the source of the induction will be on at night, and it will be destroyed after 15 seconds.If there is always a sensing source to move under the light, the lights will always be on until the movement of the movement is generally used in the corridor or balcony!

Fourth, all light -controlled light bulb sound light control light bulbs/radar induction light bulb/infrared induction light bulb (not bright during the day is bright at night). In the case of aisle installation, the installation distance between the lamp and the lamp must be greater than 4Above me.The installation distance is too close to cause: a lamp is on, the lamp next door is not on,This phenomenon has nothing to do with product quality.(Lights with light -sensing function comes with light control sensing. The installation distance of the lamp is too close, which will cause a sense of induction at night. A light is turned on, and the light of the lights next door to the light of the lighting light is not started).If any question, please contact customer service