waterproof protective case

                                     insta360 ONE X2 waterproof shell protective case
1. Product introduction
The insta360 ONE X2 waterproof case is designed to provide reliable protection and an excellent use experience for your camera.It uses a variety of high-quality materials and has powerful functions. It can protect your camera and lens in all aspects, whether in daily use or in specific environments.
2. Product parameters

Color: transparent
Shell material: high transparency corrosion PC/Germany Bayer 2805
Waterproof and usage: The ultimate waterproof depth is 30 meters.It adopts symmetrical locks, reliable structural performance, thickened shell, strong and not easy to deform.It can be dived and fully protects the camera and lens from scratches and scratches.
Lens material: Optical imaging tempered glass. The transmittance of the lens is close to 92%. After coating with AR anti-reflection coating, the transmittance of the lens reaches over 98%. Then, it is coated with a waterproof coating to achieve a drip angle of 115 degrees to ensure that water droplets do not remain on the surface of the lens and affect the shooting effect.
Button material: silicone
Waterproof ring material: amorphous highly active silica gel
Material of the connecting shaft between the main body and the back cover: high hardness 304 stainless steel
Product weight: 145g
Total product weight: 255G
Product size: length 155 * width 73 * height 38mm
Outsourcing size: length 18 * width 105 * height 45mm (Note: The outsourcing size here may be wrong. It is estimated that the length should be 180mm. It is written according to the information you provided. You can adjust it according to the actual situation)
Packing: hard paper world box packaging
Packing list: waterproof shell, invisible base, screw

3. Use instructions

Preparation before installation: Make sure the camera is turned off and remove the battery, memory card and other accessories.
Install the waterproof case: Gently put the camera into the waterproof case, paying attention to the positions of each button and interface to ensure that it is installed in place.
Install the invisible base: Use screws to securely install the invisible base on the waterproof shell, and tighten the screws to ensure a secure connection.
Check the waterproof ring: Before each use, carefully check whether the waterproof ring is intact and whether the installation is tight.If it is damaged or improperly installed, replace or adjust it in time.

Fourth, precautions

Waterproof limit: Although the maximum waterproof depth of the waterproof shell is 30 meters, actual use should be done with caution based on specific conditions to avoid long-term use at the extreme depth.
Lens protection: Although the lens has been specially treated, it is still necessary to avoid contact with sharp objects to prevent scratches on the lens and affecting the shooting effect.
Regular inspection: Regularly inspect each component of the waterproof case, including buttons, connecting shafts, etc. If any component is found to be damaged or abnormal, it should be stopped immediately and repaired or replaced.
Storage requirements: When not in use, store the waterproof case in a dry, well-ventilated place, away from direct sunlight and high temperature environments.

Please use the product strictly in accordance with this instruction manual to ensure product performance and camera safety.If you have any questions, please contact our customer service staff