Children's camouflage helmet for street skating

Cycling roller skating street dance helmet customized for children aged 7-15 years old. Head circumference 46-59CM. Helmet weight 180 grams. Density 90 

Helmet body, EPS, no chemical elements, test results are good.fasteners, Heat-pressed mesh lining, environmental protection function, cushioning function, sweat absorption function. 

Accessories: Concubine, you can adjust the size according to your own head circumference.

Small sense of helmet: 

The helmet buffer layer is composed of polyphonoethylene foam. The industry is referred to as EPS, which is high -density compressed foam. 
EPS is the second line of defense to protect the safety of the human head. It is also a relatively most critical line of defense. Do not seek beautiful appearance, but it can really have a buffer effect! 
EPS is divided into one foam and secondary foam. The EPS density of the first foam is relatively high and high. It is generally used on high -end helmets.The second foaming EPS density, low hardness, small spherical bubbles. The foam plastic for shock -proof on the common electrical packaging is the second foam EPS.Low -grade helmets also use this second foam EPS, which is a better product. 
The production process of EPS is roughly similar to the foam protective block of home appliances, but there is a problem of accuracy and moisture!EPS is generally high -temperature water injection and foaming. In the process of molding, it is inevitable that some moisture is mixed. Therefore, the new EPS strictly said that it cannot be used for helmet production. This is like casting iron parts. It must be interested in outdoor wind and rain.Time is the same; a large boiler can generally allow a few EPSs of injection plastic, which is like a multi -twenty. Then, due to the difference in the processing process of the mold, there may be small differences in the EPS at the same time.The risk of security is different. The EPS of the high-end helmet shell is generally composed of multiple pieces, and different EPS density is different. Generally, between 60 grams and 120 grams, there are only 20 grams of inferior helmets.It's stunned as soon as you press!It is difficult to press the EPS of high -end helmets! 
We are a regular manufacturer. We have professional quality inspectors to monitor the production from raw material to shipment. Most of the EPS foam density we use reaches more than 110, and some reaches more than 130. It has reliable safety performance. Please rest assured.