rear view mirror

 When attaching, use scissors to separate the wings first!!!

[Product name]: Rearview mirror car sticker wings

[Color]:black White

【Type】: Carving Category

[Specification]: OPP ziplock bag

Method of stickers:

1. Small car stickers with a transparent metastatic film (dry sticker method):

1. Clean the car body and keep it dry.
2. Determine the location to be posted.Under normal circumstances, apply it slowly and use it at the same timework

ToolScrape it flat and peel off the bottom paper.
3. If the graphic is really not big, you can also tear off all the transparent transfer film and stickers and then stick them on.

But care must be taken to avoid accidental adhesion.
4. After pasting, scrape and press it several times.Peel off the transparent transfer film.
5. inDoorFor sewingArtistEvenly aligned, folded inwards.
6. Do not let the car stickers and the body have any separation or protrusion.

2. Large car sticker installation method with a transparent metastatic film (wet sticker):
Tools: rag, sprinkler, scraper or credit card

1. Clean the car body and sprinkle water evenly on the parts of the car body to be pasted.——to reduce sticker viscosity

Easy to adjust the position.
2. Determine the location to be posted.Slowly apply it while gently scraping it with a tool.

Peel off the backing paper.
3. Encounter the doorhandleOr anti-scratch strips should be cut and wrapped according to the situation.
4. Make appropriate adjustments, and after confirming the general position of the graphics, scrape off the water and air bubbles repeatedly with force.

Peel off the transparent transfer film.
5. Use art to make the door and seam uniform and wrap them inwards.
6. Don't let the sticker and the body have any separation or protrusion.
7. Try to make sure that the car sticker containsWaterDry thoroughly, and can be dried with moderate heat if conditions permit.According to days

Depending on the gas condition, wait a day or two before washing the car.

In order to reduce the installation difficulty for customers, the car stickers we provide have been covered with transfer film in advance.

(Except for whole continuous graphics)

How to remove car stickers:

Gently scrape up the edge of the sticker with your fingernails, and then remove it completely without leaving any trace or damage.

Will damage car paint.In winter, if it is too cold to lift the corners, you can use a hair dryer to remove the glue.

The paper is heated appropriately and the glue can be easily removed after it melts.

Precautions:

1. Do not apply wax one week before you decide to decorate your car. Wax will make the stickers not stick firmly;

Do not wash the car within three days after the car sticker is applied, and do not apply it on rainy days, otherwise the effect will be reduced.

Not good!

2. If the sticker needs to be placed on the door seam or other places that require movement, don’t worry.

After pasting it, just cut it with a knife.

There are many problems with recent problems:

1. About color: Before submitting the order, the color requirements are required to be mixed with the box (that is, the color of the buyer's message to note the product number).

2. About address: Before submitting, please check whether the receiving address is your own place of receipt. Once the goods are issued, it is difficult to recover. The damage caused by the logistics caused by the logistics is more serious.allow.

3. About packaging: Because there are more or less disharmonic factors, especially products (such as shaking the head dolls, etc.), the customers who are stricter for packaging are recommended to pick up the goods.

4. About logistics: If you have logistics requirements, please buyers who must pay attention to the address of the logistics department or Yiwu telephone in the buyer's message, so as not to cause inconvenience to the goods. No message is regarded as a random logistics, and the pick -ups are not in the after -sales range.For details, please refer to the freight instructions above the store.

Logistics is to pick up the goods at the logistics unloading point by yourself.