Flashlight

Product default package:

Single flashlight + 1 hand strap + 1 18650 rechargeable lithium battery + charger + 1 gift box

CREE C8 deepens the light cup, is brighter and farther, super long-range radio flashlight height

The 31.5MM light cup is greatly deepened, with stronger penetrating power and more concentrated light.

middle.

1. Using the new American CREE LED, the light color is pure white, the measurement is up to 248 lumens. The life is long, the range is more than 200 meters, the light bulb cup

Large, good light-gathering effect! The lamp life is up to more than 100,000 hours.

Five -gear dimming: high -medium -low -flashing -SOS

A. Strong light, brightness 248 lumens, 800MA -1200MA

B. Middleness, brightness 130 lumens, 350mA-450ma

C. Short light, brightness of 60 lumens, 100mA

D. Flash, brightness 248 lumens

E.SOS, SOS International Jinds Signal (three short \ three long \ three shorts)

Length: 15.5cm

To shift gears, tap the tail switch with your thumb to shift gears.

3. The voltage input range is 3.7, and the working current of the CREE LED is 700mA.

4. The battery uses 18650 battery with good compatibility and 4200mAh high capacity battery.

*Use time: 5 hours of strong light; 8 hours of medium light; 12 hours of low light; 6 hours of flash; 15 hours of SOS

5. Glossy reflective cup. Light-gathering performance, good long-range effect, range exceeds 200 meters/

6. Condensing system: glossy reflective cup.It is better to use a smooth cup for long shots.

7. Shell material: aviation aluminum alloy

8. American original CREE Q5 high-power LED, very cost-effective. Up to 248 lumens.

9. Main purposes (such as inspections, searches, etc.); outdoor activities (mountain climbing, camping, etc.); professional needs (such as appreciation of beads)

treasure, etc.); suitable for family use

Instructions for the use of strong light flashlight
one.Switch instructions
1. The battery is the inner and inside of the positive pole (the side of the lamp head), and the negative pole is outward (tail).
2. The switch is at the tail. The switching function inherits the security switch function, and the switch is the light adjustment function.
two.Circuit Board Instructions
1. The flashlight of our store adopts advanced voltage stabilization constant current technology, which can effectively solve the requirements of LED flashlights on stabilization constant current.
2. Special reminder: a. Do not use it over pressure, do not exceed 4.2V B. The battery is the front of the battery, do not reverse, otherwise it will burn the board C. Pay attention to the changes in the temperature of the flashlight and ensure heat dissipation D. Non -professional personnelDo not open the line board
3. Warranty description: Open or handle the circuit board no longer the warranty range.
three.Instructions for lithium battery use
1. The battery for this flashlight is mainly 18650 lithium batteries.
2. Lithium battery characteristics: The charging method of lithium batteries and mobile phone batteries is completely different; lithium batteries are not memory, and they can be charged at any time. Do not charge over.
3. Little charging for 6 hours, just turn on according to the green light of the charger.No must be charged.
4. The natural discharge rate of lithium batteries will release about 1%or less every day when it is not used. Although it is slow, it will prevent the placement for too long.
5. Pay attention to the battery's waterproof, deadline, falling anti -falling, etc.
6. Special reminder to use the "three defense" charger with anti -overcharging, anti -counterpart, and short circuit;
7. If the battery is not used for a long time, the power should be fully saved, and it should be charged again at about three months.
8. Warranty description: The range of warranty is no longer after the battery is exported.
Four.Instructions for use of flashlights
1. When the flashlight is used, it is selected according to the voltage and battery requirements of the flashlight. Do not use it randomly to prevent the circuit board from burning. Do not use different models and different voltage batteries at the same time.
2. In the use, when the brightness of the flashlight has changed significantly, the flashlight should be turned off to prevent the battery from being placed.
3. Heading skills: During the use of the flashlight, it is necessary to ensure heat dissipation.When the battery is fully charged, use the second gear first, so that the light head and battery of the flashlight can be extended to the product life!Holding the flashlight with your hands is a good heat dissipation; it is recommended to heat the heat in time according to the thermal heat of the flashlight when lighting, and then light it up after the temperature drops to heat the heat.
4. Instructions for the instructions of the flashlight to prevent waterproof, shockproof, etc., strengthen prevention.
5. Keep the inner wall of the lamp cup clean, and you cannot wipe it with your hands or harder objects; the fingerprints on the lens, you can use a cotton swab -like lens cleaner to try it gently.
6. Do not direct the light of the flashlight to the eyes of people, super bright, so as not to affect vision, especially children.
7. If you do not use a flashlight for a long time, please take out the battery (one month or longer) to avoid chemical corrosion.
five.Protection description
1. Do not contact the flashlight with the sun, water, chemical products and corrosive gases for a long time to avoid damaging the flashlight protective layer.
2. In order to keep the "0" circle and the thread spin, wipe the Vaselin oil on its surface 2-3 times a year.
six.Fault maintenance
1. Check the battery: Make sure the battery has electricity and install the battery in the correct direction. The battery of different brands cannot be used.
2. Check the tail cover: Make sure that the switch is tightened and contacts well, and ensure that the copper column of the tail cover is well exposed to the metal sheet of the tail cover.
3. Pay attention to whether the lamp head is loose.

Several common misunderstandings for flashlight purchases
Misunderstanding 1: The higher the brightness, the better the better

The way to improve the brightness method is to increase the comprehensive platform from the light head to the reflective bowl, battery, and main pull design.International and domestic products have undergone strict design and testing to ensure life and safety.
The second is to achieve increased voltage and current: the back of the back of the overclocking is huge, because the two do not match, which causes frequent burning heads and lithium batteries.Essence
Misunderstanding 2: Misacled by false parameters
Many sellers' intentional or unintentional deficiency and lingering values
Misunderstanding 3: Orange peel reflective bowl may not be better than light surface
The reflective efficiency of the orange peel reflector bowl is lower than that of the light surface. You can find that the large -power search lights on the market are basically light bowls, because the reflective efficiency is high and the range is long.So why do most tactical flashlights use orange peel reflective bowls?The reason is simple, in order to get a perfect light spot.Because the bulbs we generally use are filaments, and the light spots reflected by the reflective bowl happened to be a filament projection. The principle is similar to the principle of phase phase of the convex lens.In this way, the light spots are a clear filament, and it is ugly.We look at the parameters more depends on the actual effect!
The electricity of the shop sells is true, the battery life is long, the light color is pure and white, and the lighting effect is perfect!It is an auxiliary tool for engineering work, wild sports, etc.!
——The flash.The top titanium oxide alloy strengthens the attack and one strike design, which can replace the safety hammer to break the window to escape in emergency situations.
【common problem】
Q: Do I need to charge first before use?
Answer: Please use it first. When the light and dark point of the flashlight, then use it for 4 hours before use. The lithium battery is afraid of discharge. Please develop the habit of charging usual.
Q: What should I do if the light bulb is broken?
Answer: The light life is 10w hours. In case of unfortunateness, you can contact us, discount.
Q: What is lithium battery discharge?
Answer: The brightness is obviously weakened and continued to be used. The battery damage is caused by professional activation.
Precautions for strong light flashlights
Do not disassemble the lamp head frequently, so as not to cause reflective cups or bulb damage.
Precautions for strong light flashlight maintenance
When used, please provide daily routine maintenance of the flashlight so that it can continue to provide you with high -quality services
1. After each use, please wipe the flashlight with a clean soft cloth.
2. When the flashlight is contaminated with seawater or has corrosive liquids, wash it with water in time and blow dry with a hair dryer.
3. When the lamp head and tail cover are not smooth, please apply a small amount of silicone grease at the interface.
4. When the flashlight is not used, please remove the battery and store it in a cool place.