Supply of tile positioning cross

 Tile Spacer Plastic Cross Tile Spacer

1. Name

Tile positioning is located, also known as plastic cross, foreigners call ittile spacer,plastic cross, Translate is a tile interval, tile positioner or plastic cross.

2. Material

The mature products in the market are all adoptedPEThe color is porcelain white, and its advantages are good toughness, good tensile, non -toxic, impact resistance, moisture resistance, resistance, and not easy to explode.

3. Product use

Adjust the size of the gap in the middle of the tile, make the regularity of the tile stickers beautiful, and make the gap between the tiles consistent and uniform.

The laying of tiles must pay attention to the seams. Now there are some so -called seamless tiles, which is actually just a clever approach.The tiles are not only to deal with the problems of uneven specifications, but the most important thing is to reserve the location of thermal expansion and contraction.In the past, everyone may have heard of seamless steel pipes.Consumers need to pay attention to some hype of seamless tiles now.Aside from the decoration, we know from a physical point of view. This is theoretically not past: the expansion of seamless steel pipes is the whole360The outward, so there will be no cracks.Most of the tiles are constructed in a relatively closed space. Taking the wall as an example, generally there must be fixed walls and the ground closed. If the tiles are seamlessly treated during construction, then when it expands, it extended there to extend there.Woolen cloth?Obviously, a premise that seamless tiles are realized is that the thermal expansion and contraction rate of tiles is zero.We know that this possibility is zero.So what are the consequences of forcibly seamless treatment?It is impossible for tiles to heat up and swipe the wall, because the adhesion force on the back cannot be greater than the power of pushing the wall.Then there is only one consequences: tiles are arched.
  4. Specifications

Its specifications are1.5 mother, 2.0 mother, 2.5 no, 3.0 mother, 4.0 mother, 5.0 mother, 6.0 mother, 8.0 motherwait.1.5mmSpecifications refer to the width is1.5mm.

Remove the tiles, the wall is on the wall1-2mmGood, some small bricks(100x100mm)For the sake of beauty, leaving a sewing requires great.

Stay on the ground, in addition to retro bricks, you need to leave a large gap(5mm-10mm)In addition, other brick species are generally3-10mmGood.

The following data is for reference only, and the specific size choices are sometimes based on personal hobbies and aesthetics.

1.5mm                Used for seamless bricks and marble bricks 

2.0mm                For wall tiles             

2.5mm,3.0mm           Used for small -sized tiles        

4.0mm,5.0mm,6.0mm     Used for medium -sized tiles     

8.0mm                Used for large -sized tiles and outdoor tiles

5. Dosage

Positioning of tiles: Under normal circumstances, a piece of tiles with a cross,5mmIf you wait for the bricks, you can take it down and then use it again. Generally, you can use it three times, so that you can save some costs; however3mmand2mmThe cross is not easy to win, otherwise it is easy to deduct the bricks. Only after the brick is completely dry, it can be won, so it is difficult to reuse it.Buy with the principle of a cross.

6. The purpose of leaving sewing

First, in order to adjust the size error of the wall tiles, grasp the overall beauty;

The second is to reserve telescopic joints to sag down the wall tiles, and avoid squeezing the wall tiles from the upper wall tiles to squeeze the wall tiles and fall off.

7,Instructions

1), Flat

2), Firm