Japan Shin-Etsu modified silicone oil KSG-210 dimethyl silicone oil

Anti-Aging Bosein Face Cream Recipe

1. Ingredients and quality ratio
   • Oil phase: Shin-Etsu KSG210 (2%), KF-6038 (3%), polydimethylsiloxane (5%), triglyceride (ethylhexanoate) (4%), synthetic wax (2%)
   • Aqueous phase: deionized water (55%), glycerin (8%), 1,3-propylene glycol (5%), Bosein solution (30% concentration, 10%)
   • Functional ingredients: dipotassium glycyrrhizinate (0.3%), sodium hyaluronate (0.5%)
   • Preservatives: p-hydroxyacetophenone (0.5%), 1,2-hexanediol (0.7%)
2. Production points
   • The oil phase is mixed and heated to 75°C and stirred until completely dissolved; the water phase is separately heated to 75°C to dissolve glycerin, sodium hyaluronate and other ingredients.
   • Slowly pour the water phase into the oil phase, stir at high speed to emulsify, add Boseine, preservatives, etc. after cooling to 40°C, and stir evenly.

Refreshing sunscreen lotion formula

1. Ingredients and quality ratio
   • Oil phase: Shin-Etsu KSG210 (3%), cyclopentasiloxane (6%), isohexadecane (4%), sunscreen (such as zinc oxide, 10%)
   • Aqueous phase: deionized water (65%), butylene glycol (5%), glycerol (3%)
   • Auxiliary ingredients: vinyl dimethicone/methicone silsesquioxane silsesquioxane crosspolymer (1%), preservative (phenoxyethanol, 0.8%)
2. Production points
   • First, mix the oil phase ingredients evenly, dissolve the water phase ingredients separately, then add the oil phase and emulsify and stir.
   • Finally, add silicone elastomer powder and preservatives, stir at low speed until the system is fine, and you can obtain a water-resistant and sweat-resistant sunscreen lotion.

Silicone oil water-in-water cream formula

1. Ingredients and quality ratio
   • Oil phase: Shin-Etsu KSG210 (3%), cyclopentasiloxane (5%), isohexadecane (2%)
   • Aqueous phase: deionized water (80%), glycerin (6%), butylene glycol (3%), sodium chloride (0.5%)
   • Preservative: 1,2-pentanediol (0.5%)
2. Production points
   • While the oil phase is stirring, first add 10% water phase and homogenize for 3 minutes, then slowly add the remaining water phase and homogenize at low speed for 1 minute.
   • No need for high-temperature heating, just emulsification at room temperature. The finished product can quickly break emulsification and release water after rubbing, leaving the skin feeling refreshed.