Brand source metal fixed-angle sharpener comes with 4 whetstone…

All products of the store contain taxes. If you need to invoic, please contact customer service.

Detailed guidelines:
• Anecades ① Secure to a stable table.
• Install the attachment ② in the hole of the attachment ①
• Connect attachment ③ And attachment ⑤.
• Use a wrench to from the attachment ③ Remove the positioning attachment. Pass the attachment ③ through the ball of the attachment ②, and then fix the attachment. 
• Choose the whetstone according to the requirements of the tool. Can be installed on the attachment at the same time at the same time ⑤ Upper and bottom. 
• Use a wrench to loosen all the screws on the clamp, press the button on the rear of attachment ①, and the clamp can be opened.Place the tool to be sharpened into the clamp (please do not put the tool into the deepest part of the clamp).After placing the tool, first tighten the three screws on the surface of the clamp, and then gently tighten the two small screws on the top of the clamp.(Because the thickness of the tools varies, the two screws above are to keep the clamp from shaking.)

• Elastic splint, loosen the fixture screw, press and hold the switch after the desktop fixed device to open the fixture, without having to open the fixture with your hand.
 • The knife grinding device is completely made of metal. The main materials are aluminum alloy, zinc alloy, stainless steel and ABS accessories.Therefore, it has good durability.
• Use a light push -pushing and pull -off knife method to grind the knife. (The arc sharpening method requires relative sharpening experience)
• The angle adjustment device allows any angles to be set up in a wide range.• Carbon steel fish eye bearings ensure the smallest sliding friction to increase the endurance.
• The fixed grinding knife stone pulling device is a general stand that can accommodate up to 160 Millimeter grinding stone.There is a powerful spring inside, which can keep the oil and stones evenly and stable.And there is a adjustable rubber handle.

• The inner hexagon wrench is suitable for the entire product work
• After the whetstone is widened and thickened, the size is 150*23*10mm (including the base). The base better protects the whetstone from breaking.